Standard and MRI Mallard 2800C Anesthesia Machines

STANDARD MODEL:

• Inverted bellows, ascending during exhalation as used in human anesthesia ventilators
• Patient may breathe spontaneously from the bellows Microprocessor based electronic control system
• L.C.D display of respiratory variables
• Flow rate adjustable from 0-600 liters per minute with expanded range of flow rate selectivity
• Scavenger assist included. Controls are scavenger assist on/off and scavenger assist flow rate
• Includes & Interfaces with the Mallard absorber circuit Designed stand for multiple vaporizers. GCX mounting rail for mounting physiological monitors.
• Extremely quite & smooth in operation

MRI MODEL:

• This model have 100% pneumatic controls and displays (no electronics). They also contain all non ferritic materials to avoid magnetic attraction
• Pneumatic display of selected respiratory variables
• Inverted 18 liter bellows, ascending during exhalation as used in human anesthesia ventilators
• Flow rate adjustable from 0 - 600 liters per minute with expanded range of flow rate selectivity
• Scavenger assist included. Controls are scavenger assist on/off and scavenger assist flow rate
• Designed stand for multiple vaporizers. GCX mounting rail for mounting physiological monitors
• Come with large animal breathing circuit
• Extremely quite & smooth in operation
• Servicing Is extremely minimal and easy

SPECIFICATIONS

• Standard: A microprocessor based, electronic, time cycled, pressure limited, anesthesia ventilator
• MRI: A pneumatic controlled, time cycled, pressure limited, anesthesia ventilator

• Inverted (Ascending)

• 18 liter bellows for large animals with large animal absorber circuit

• Inspiratory Time - .1 - 3 seconds
• Inspiratory Flow - 10 - 650 LPM
• Inspiratory Pressure - 10 - 70cm H2O
• Rate - 2 - 80 BPM
• Pneumatic Manual Push Button for Inspiration: YES

• Inspiratory Time
• Rate (BPM)
• I:E Ratio

• Failure to Cycle - Visual-Audible
• Power Failure - Visual - Audible
• Low Gas Pressure - Visual - Audible

• Overpressure Governor 80cm H20 (adjustable)

• 19mm port Absorber

• 6 liter, quick change for large animals

• 37" (94 cm) Width x 28" (71 cm) Depth x 57" (145 cm) Height
• Weight: 130 lbs. (59 kg)
• Note: Depth and Width sizes above account for outboard hoses and fittings. The footprint of the base of the cart Is 30" (76cm) Width x 24" (61cm) Depth

• Medical Air Option: (Optional 0-10 L/M Air Flow Meter and plumbing to mix medical air with default oxygen anesthesia gas.)
• Optional vaporizers and mounts
• Note: Depth and Width sizes above account for outboard hoses and fittings. The footprint of the base of the cart Is 30" (76cm) Width x 24" (61cm) Depth